Use your vinyl cutter to create decals, point-of-purchase displays, banners and signs with this easy-to-use, calendered pressure-sensitive vinyl. This is a cost-effective way to create 1 and 2-color decals and signs. Indoor and outdoor use.
Cut the design in the positive (facing up). You should always test cut prior to any production run. For optimal cutting and weeding, maintain a line thickness of at least 1/8” for logos.
Custom-Cut-For-U Option Available: You upload your design, we will cut, weed and mask design for you. Additional fee's apply.
Don't run out of Pre-Mask for placing your sign vinyl art onto your hard materials.
This light-tack, heat-resistant tape is an ideal solution for lettering caps, working with small lettering, and a perfect companion when cutting sign vinyl.
Sign Vinyl: cut design in the positive, weed away excess leaving graphic on paper carrier. Lay pre-mask tape over design and use a plastic squeegee to remove any air bubbles. When ready to apply graphic to hard good, peel off paper liner leaving graphic on pre-mask tape. Place design in position, use plastic squeegee to remove air bubbles on graphic. Peel off pre-mask tape. If graphic is not adhering, you may need to use more pressure with the squeegee.
Make sure your masked heat transfer vinyl designs and rhinestone transfers are securely masked, smooth, and bubble-free with this plastic squeegee.
12" x 10" sheet of All that Glitters pressure sensitive permanent sign vinyl. Masking and instructions are included with your purchase.